fypblogmaisarah

WEEK 6

WHEELCHAIR HAVING SOME PROBLEM

According to the title above, yes there are some problem during the testing of the actuator motor at the wheelchair. This testing was supposed to present for my co-supervisor to show the functionality, however the structure of the welding part are not strong enough and some o the parts are falling apart. the problem of the welding part include the screw under the seat is falling and not going to hold the seat any longer. While the welding points are breaking after few testing before the final touch up at the welding shop (last welding process). This is sad to see as it shows that the welding is not good enough for this kind of project. Below is the figure of the screw under the seat is falling. 

Figure shows that the screw that attached the actuator motor to the seat is falling

This makes me to bring back the wheelchair to another welding shop for repairing process. I have been recommended by Sir Malik to go to another welding shop that can make the best work for any fyp projects. So this week is only to send back my wheelchair for repairing and fixing process.